◆Adopt the technology of three-integral, 16 kinds of capacity can be chose.
◆Calibration without full-capacity, data inputting with only one key.
◆Many types of filter parameter setting.
◆Many types of division can be selected.
◆The position of point can be selected.
◆ Zero-tracking range and zero-catching can be selected.
◆Many types of print-mode can be selected.
◆Two fixed-value can be set. It can be used in value setting and alarm.
◆Many types of baud rate and transmit format selection,successive transmission and net-communication with 26 (52) pieces can be selected.
◆Date, time, vehicle number, cargo number, unit-price, fixed value 1, fixed value 2 setting.
◆Weight, sum, total times, total weight, total sum display and printing.
◆Positive and negative peak value test  .
◆Data protection when power off.
| Accuracy class | OIML Ⅲ |
| Display | 7 digits 0.5 inch LED display |
| Keyboard | 5 function keys |
| Division | 1; 2; 5; 10; 20; 50 |
| Tare range | 100% F.S. |
| Max.Number of load cells | 4×350Ω |
| Supply voltage | V | AC: ~220V (-15%…+10%) |
| Hz | 50 | |
| /DC: 6V | ||
| Max.power consumption | VA | 6 |
| Fusible-ling fuse(sloe blow) | A | 1 |
| Communicate interface | RS-232 | |
| Print interface | Parallel interface,contact with micro-printer | |
| Storange –humidity | ≤70% RH | |
| working –humidity | ≤90% RH | |
| Storange –temperature | ℃ | -10…+50 RH |
| working–temperature | ℃ | 0…+40 RH |
| Outline | mm | 170×70×105 |
| Weight | kg | 0.6 |
LOAD CELLS TO INDICATOR
Note:
● +E、-E:Load cell's power.
● +S、-S:Load cell's feedback signal.
● +IN、-IN:Load cell's output signal.
● It is 9-pin plug.
● If using the shielded 4-pin cable, you must connect
+E,+S and -E,-S.Otherwise it will affect the indicator.
● After connecting the load cell, the indicator should
be turned on. Otherwise the display will be abnormal.


